Product QuestionsAnswered by Jared, the Generator Expert
Is there a flush-mount equivalent to the 31410CRK, or a flush-mount kit that can be used with it?
Paul
from Illinois
November 01, 2013
Answer
Thanks for the inquiry!
The Reliance Controls 31410CRK, 30-amp power transfer system does not come in a flush-mount version. However, you are in luck as there is a flush mount kit available for that particular reason. You can find the KF10 flush mount kit on our site, by following the link provided below.
Can the Reliance Controls Hinged Cover for the 10 circuit transfer switch be used with the Reliance Control flush mount kit?
Thanks..........
Nicholas Cartesio
from New York
July 15, 2013
Answer
The CK10 protective cover will mount to the face of the unit even when the transfer switch is flush mounted in the wall. It will attach to the two screws at the top (face) of the unit and fits within the side flanges of the cabinet. This is true for all of the protective covers (CQ10, CK06, CK10).
Was this answer helpful?
Yes
0
No
0
What is the minimu distance between studs that the KF10 flush mount can fit, and how deep is it behind the outer flange?
Brent
from Texas
August 27, 2012
Answer
The picture is actually a little deceiving as there really is no back on the kit, it is open.
It is best to review the installation instructions for sizing information.....