Expert Recommended AccessoriesSelected by Jared, our Expert
Required Accessories9
These accessories are required to properly setup/install this product.
Optional Accessories10
Features
Weather-X ™ Fabric
Water resistant backing for extra weather and abrasion protection
Easy Storage
Integrated storage bag
Fast protection when storing your generator or on a jobsite
Protects against UV damage, rain, dirt, birds and tree sap
Versatile Fit
Bottom closes with rip-and-grip tabs
Integrated storage bag
Fits: 35.5"L x 23.5"W x 25.5"H
Please Note
Do not include wheels when measuring width of generator
California residents see
Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause Cancer.
Product QuestionsAnswered by Jared, the Generator Expert
What kind of cover do you recommend for an in-use generator during wet weather?
D.A.
from New Jersey
February 03, 2014
Answer
The only covers available which are intended to be used with the generator running would be the GenTent safety canopy.
The GenTent safety canopies are designed to protect the delicate parts of your generator when exposed to poor weather conditions. You can find these products listed in the following link; GenTent Safety Canopies. There are several models of these canopies available, so you will need to find one that is right for your portable generator.
Was this answer helpful?
Yes
0
No
0
I have a Troy Bilt XP 7000 generator. I have purchased a GenTent cover and have installed the tent clamps on the 4 legs. I want to leave them installed to be able to install the tent faster in case of inclement weather. With the clamps installed, the maximum width and length dimensions are longer than just the basic generator. The resulting measurements are 25 wide x 36 long. No change to the 29 height. I want to order your Model 79547 Classic Accessories XLarge Generator Cover. Your specs say it is 25 wide x 37 long. The 37 is OK, however, I am concerned if the 25 width will fit. Are YOUR dimensions ID Inside dims or OD outside dims? Do you think it will fit OK without causing the clamps to move around? Thanks.
Albert Chopey
from Maryland
September 12, 2013
Answer
Thank you for your interest in Electric Generators Direct!
Based on the information that you have provided, It sounds as though the Classic Accessories, 79547, XL Generator Cover will suit your needs quite well. The measurements provided are ID, in order to clarify compatibility prior to your purchase. Since you have determined that the generator with the GenTent is 25 x 36, we would recommend the Extra Large Generator Cover for your needs.
Was this answer helpful?
Yes
0
No
0
Will this cover fit the Winco HPS12000HE?
Ron
from New Jersey
August 31, 2013
Answer
Thank you for your inquiry to Electric Generators Direct!
Unfortunately the Classic Accessories XL Cover will not fit the Winco HPS12000HE. The overall dimensions of that generator slightly exceed to cover's size. At this time, we do not offer a good substitute for that unit.
Was this answer helpful?
Yes
0
No
0
Will this cover fit a Generac GP7500E generator?
Michael
from Rhode Island
January 03, 2013
Answer
The X-Large cover is too large for the Generac GP7500E generator and recommend the Large cover as I have fit tested it and it fits great.
Was this answer helpful?
Yes
0
No
0
I have a Generac GP15000E and I'm trying to purchase a cover that fits. Could you recommend one?
JAMES Shipley
from Maryland
August 20, 2012
Answer
The Classic Accessories X-Large cover has been fit tested and fits the Generac GP15000E generator perfectly.