Search
Priority Shipments @ Electric Generators Direct View All In-Stock Electric Generators View Transit Times
< Back to Product

Gen-Tran 63654 Power Inlet Boxes Reviews & Ratings - Product Discontinued

Share This Product
Plus 1 This Product
Tweet This Product
Pin It!
StoreShippingPriceShop
 
Discontinued
Gen-Tran 63654 Reviews
7 Reviews  Sort by 
 
Dan
REVIEWED
JAN.
17
2013
5 out of 55 out of 55 out of 55 out of 55 out of 5
Works Great
I had this inlet box professionally installed. I did, however, open the box and inspect the insides upon arrival. It's a tight fit inside the box and the heavy gauge wire requires muscular fingers to install the conductors.

Take your time and you'll get it wired. After the electrician had the inlet installed, I tested the fit of the 25 foot, 50 amp generator cable (Generac part #6389). The first try the fitting was very tight and took quite a bit of work to get the plug to go in the... more
Was this review helpful?
00
Don
Purchased from Electric Generators Direct
Purchased 4/5/12
REVIEWED
APR.
27
2012
5 out of 55 out of 55 out of 55 out of 55 out of 5
Generator Plug
Works as planed.
Was this review helpful?
00
Chris
Tuxedo, NY
Purchased from Electric Generators Direct
Purchased 1/16/12
REVIEWED
MAR.
02
2012
5 out of 55 out of 55 out of 55 out of 55 out of 5
Great Outlet
Just installed the gen tran 50amp inlet outlet. There is plenty of room in this enclosure to wire the outlet. Nice unit. Highly recommend this to anyone. As long as you take your time and keep wires neat there is no reason why you would run into problems with the install. I give this 5stars and two thumbs up.
Was this review helpful?
00
Maryann Arrien
Putnam Valley, NY
Purchased from Electric Generators Direct
Purchased 12/1/11
Total Reviews
3 Reviews
REVIEWED
JAN.
18
2012
5 out of 55 out of 55 out of 55 out of 55 out of 5
Inlet Box Connection Too Tight - Wouldn't Twist
As another review said, it is very tight in there for the wires. The inlet model I have ending in a 4, (model 64654) requires you to take the connector and the flip cover off, wire it, and reassemble with 3 screws in the bottom. Getting the 3 screws back in the threaded holes was tough. I had to take the unit off the wall, and brace the top of it against the house to get the 3 screws to go back in. If you have no other choice than this inlet box, be sure to trim the wires back as much as... more
Was this review helpful?
00
Rich
Garrison, NY
Total Reviews
2 Reviews
REVIEWED
OCT.
11
2011
5 out of 55 out of 55 out of 55 out of 55 out of 5
Good Product, Simple Connections
This product was easy to use. The plugs connections are color coded. All you need to do is strip the wire, insert in the appropriate color and screw down. For a 50 amp connection you are using 6 gauge wire so don't keep the wires too long and you'll have plenty of room in the box without issues.
Was this review helpful?
00
John
Oketo, KS
REVIEWED
JAN.
05
2011
1 out of 51 out of 51 out of 51 out of 51 out of 5
Not Enough Room
There is not enough room in the box for the wiring. The box needs to be several inches taller.

We were very disappointed that we could not get the old Midwest version that we used to get from you, there was a lot more room for the wiring.
Was this review helpful?
00
John
Oketo, KS
REVIEWED
JAN.
05
2011
1 out of 51 out of 51 out of 51 out of 51 out of 5
Not Enough Room
There is not enough room in the box for the wiring. The box needs to be several inches taller.

We were very disappointed that we could not get the old Midwest version that we used to get from you, there was a lot more room for the wiring.
Was this review helpful?
00
Sign Up
Receive Weekly How-To Tips & Specials

Check out the latest Gen-Tran 63654 power inlet boxe reviews.Compare our Gen-Tran 63654 ratings. Find the Gen-Tran 63654 power inlet boxe that is right for you.