Reliance Controls Q510C - 50-Amp Transfer Switch w/ Interchangeable Breakers
Your Online Reliance Controls Portable and Standby Generator Superstore.
|
 |
Reliance Controls 50-Amp Transfer Switch w/ Interchangeable Breakers
|
|
|
Retail Price:
|
$450.00 |
 Discount:
|
-$75.00 |
|
Your Price:
|
$375.00 |
|
Safest Way to Distribute Power
• Eliminates dangerous backfeeds and electrical overloads
Multiple Circuits
• (6) 15A 1-pole, (1) 20A 2-pole, and (1) 30A 2-pole
Built-in Analog Wattage Meter
• Track power input to ensure proper load balancing
10 Total Circuits
• Mix any combination of single and double pole circuits
UL Listed
• Certified for use by Underwriter Laboratories
Need a 50-amp power inlet box (Model PB50) to power cord
|
| Model |
| |
Model Number: | Q510C |
 | | | Manufacturer Name: | Reliance Controls | | | | Made in USA: | Yes | | | | Maximum Wattage: | 12,500 Watts | | | | Voltage: | 120/240 Single-Phase | | | | Frequency: | 60 Hertz | | | | Rated Amps: | 100/50 Amps | | | | Max Generator Input: | 50 Amps | | | | Conduit Length: | 18 | | | | Conduit Diameter: | 1" | | | | Enclosure: | NEMA 1R | | | | Circuits: | 6 - 15A/120V
1 - 20A/240V
1 - 30A/240V
| | | | Circuit Breaker Protection: | Each Circuit | | | | Circuits Breakers: | 10 | | | | UL Listed: | Yes | | Overview | | | | Weight: | 20 Lbs. (9.07 kilograms) | | | | Dimensions: | 13.75"L x 13.75"W x 4.5"H
(34.93 x 34.93 x 11.43 cm) | | | | Warranty: | 2 Years |
|
Average Rating: 5.0 of 5.0
|
|
|
 |
Written March 02, 2008 |
| Reliance Controls 50-Amp Transfer Switch w/ Interchangeable Breakers Review |
| By Toos To |
After looking at a number of transfer switches I settled on the Q510. It went it very easily and it took me a weekend to finish the job (not working full time). I like the prewired harness and the ability to replace/switch breakers in the panel.
I have a 7500 w portable generator and it works fine using this panel. A bit pricey (you can get cheaper ones from GeneratorsDirect that have fewer circuits), but I like having the flexibility that the 10 circuit panel provides. I now have all my water pumps (sump, septic, and well), a few lighting circuits, and my water heater on line if I need them (you would have to rotate loads of course, using the generator I have). I left the leads long enough so if I change my mind I can move the water heater feed over to my furnace/air handler (also 30 amps). I probably won't need it since I have a wood stove and fireplace, but its an option anyway.
Nice to have peace of mind. I recommend this product. |
|
|
|
|
|
You may also like...
|
|
|
|
|
Contact Us
